Print this page

Penny + Giles Potentiometer Helps Xylem Go with the Flow

Tue, Jan 08, 2013
Penny + Giles Potentiometer Helps Xylem Go with the Flow
Penny + Giles has supplied its ICS100 linear potentiometers to provide positional feedback for Xylem Flow Control’s range of electro-hydraulic actuators, which provide a solution for the operation of choke and control valves used in the oil and gas industry; and for water & wastewater transport and treatment applications.
 
Xylem has worked closely with Penny + Giles for over twenty years since specifying the company’s HLP100: predecessor of the current ICS100 potentiometer fitted to Xylem’s range of electro-hydraulic actuators. 
 
As Xylem’s engineer John Smallshaw explains: “We specialise in the design and manufacture of electro-hydraulic actuation for control valves for both onshore oil and gas pipelines and pumping stations and offshore topside choke pressure and flow control applications, where there is either Zone 0 (constant hazard) or Zone 1 (occasional hazard) risk from explosive petrochemical gas.
 
“A typical application is to provide an actuator control system to meet the operating parameters of the specified size of valve based on the working stroke, the fail action and operating thrusts for opening and closing the valve against process operating conditions. The process valve must be capable of handling the specified pressure or volume of oil or gas determined by the valve manufacturer, and the actuator is sized to meet the operating conditions for that particular application. It is our decision to select the position feedback device that will provide optimum accuracy and performance for the system.” he says.
 
As an example, for Zone 0 applications Xylem would normally use a potentiometer or an alternative intrinsically-safe certified device. The potentiometer is invariably the easiest and most cost-effective device to apply, however the selection of the feedback device may be determined by the hydraulic operating fluid as the position feedback device is of the ‘in-cylinder’ type and therefore immersed in hydraulic fluid. 
 
The company prefers to work with mineral-based hydraulic fluids as they are generally suitable for use with potentiometers. For systems incorporating water-based fluids such as water glycol, special consideration has to be given to the selection of the feedback device or the method of mounting the potentiometer. It is possible to locate the potentiometer within a special oil chamber that is mechanically linked to the actuator but operating outside the hydraulic medium.
 
Xylem uses Penny + Giles in-cylinder devices, which is why it is predominantly the ICS100 that is installed in the back of its hydraulic actuators. Linear actuating devices are used on linear choke and plug valves rather than rotary units because potentiometers provide an intrinsically safe feedback signal from a relatively low power source. Equally important for safety reasons, unlike inductive feedback devices, potentiometers aren’t capable of producing a current to generate a spark. 
 
Typical applications include valve systems installed topside on oil and gas production platforms, helping to control the flow of media as it is being transferred up through the special risers that transport media from the well itself; and on to the pipelines that eventually transport it ashore for storage or processing. Automatic feedback from the potentiometer, delivered via a closed-loop system, allows pressure and flow to be monitored and analysed and the position of the valve adjusted as required. 
 
A nominal 5 volt signal is supplied to the ICS100 from the Xylem positioner controller, which operates on an input signal from a control panel to tell what valve adjustments are needed to maintain the required flow or pressure – 4 milliamps signal is the closed position and the signals between 4 and 20 milliamps represent 0-100%. So if the valve receives a 12 milliamp signal it will recognise the change in voltage as its new 50% position, based on feedback from the Penny + Giles potentiometer. 
  
Plug and globe valves are normally modulating as they respond to changing process conditions caused by flow and pressure variations. However, choke valves fitted topside of the wellhead to control the flow/pressure of media coming out may remain in one position for extended periods and only change as the oil or gas pressure in the well depletes in order to allow flow to be maintained.
 
Xylem has actuators operating within onshore oil and gas pipelines in Turkey, India and, most recently, a crude oil pipeline in Abu Dhabi. They are also used to control valves in pumping stations, where the oil and gas is compressed and re-charged to enable it to be transported through the pipeline. For these applications ICS100 potentiometers are fitted to the actuators to provide the feedback that monitors pressure and flow control valves.
 
Summing up, John Smallshaw says the migration from Penny + Giles’ HLP100 to the new, metric ICS100 was virtually seamless as the models are interchangeable; so when he needs to replace HLPs or supply spares, even after all this time, it is natural to specify the ICS.  
 
He adds: “In-cylinder potentiometers play a crucial role in our actuator business in terms of performance, reliability, safety and value, which is why we buy Penny + Giles. The ICS100 is very easy to specify and install, it is competitively priced and the company listens to our input and responds quickly to any issues we have.
 
 
 
Tagged under

Share and subscribe

MEDIA

Show all Media

Quotes

  • “In-cylinder potentiometers play a crucial role in our actuator business in terms of performance, reliability, safety and value, which is why we buy Penny + Giles. The ICS100 is very easy to specify and install, it is competitively priced and the company listens to our input and responds quickly to any issues we have.” (John Smallshaw)

External Links

Download attachments:

About Us

Advanced Insulation (www.aisplc.com)

Since its formation in 2007, Advanced Insulation has become a single source provider for insulation and fire protection systems to the oil and gas industry, and represents one of the most respected and progressive names in topside and subsea insulation worldwide.

Advanced Insulation offers a wide range of products to meet the growing demand for fire protection and thermal insulation systems adaptable for elevated service temperatures and pressures.

AL-KO Kober (www.al-ko-co.uk)

Since 1931, AL-KO Kober has been manufacturing premium, high quality components used in the Automotive, Commercial and Leisure industry.

The extensive range of chassis components, premium accessories and spare parts are engineered to last, ensuring whatever product you have purchased, you will benefit from the generations of development and enjoy a lifetime of service.

Arc Energy Resources (www.arcenergy.co.uk)

Arc Energy Resources is one of the UK’s leading specialists in weld overlay cladding and fabrication for the oil & gas industry. The company’s expertise provides protection against corrosion and wear for a variety of process and pipeline equipment for use in any hostile environment.

The company recently made a major investment in two new Rotating Head welding machines costing £500,000. This has increased productivity and extended the size and scope of work it can handle, which now includes complicated component geometries for the full or partial cladding and fabrication of a huge range of component sizes weighing up to 15 tonnes. The company’s in-house designed cladding workstations feature state-of-the-art control systems developed to suit its customer’s specialised engineering requirements, and can clad bores up to four metres diameter and areas of restricted access within bores as small as 20mm diameter. Arc Energy also offers in-house test weld, heat treatment, PMI and NDT facilities.

Industry certifications include ISO 9001:2008 quality management, ISO 3834-2 fusion welding of metallic materials, and the internationally renowned ASME U and R Stamps, as well as ISO 14001:2004 environment management, Investors in People and OHSAS 18001:2007 Health & Safety management system.

Curtiss-Wright Industrial Group, which includes the legacy brands of Arens Controls, Penny & Giles, PG Drives Technology and Williams Controls, is a recognized leader in providing components and sub-systems which enable customer specific solutions for on- and off-highway vehicles. These include medium- and heavy-duty trucks, buses and motor coaches, construction and agricultural vehicles, materials handling, and other specialty vehicles, as well as sophisticated wheelchairs and scooters for medical mobility.

We are a leading provider of electronic throttle controls, transmission shifters and sensors for commercial off-highway equipment and heavy trucks, so helping to address the long-term trend towards attaining higher fuel efficiency and lower emissions. We also supply operator controls and advanced motor controllers for hybrid and electric vehicles, such as buses, forklift trucks, pallet stackers, wheelchairs and rehabilitation chairs.

With a proud legacy spanning more than 85 years, Curtiss-Wright is a global innovative company that delivers highly-engineered, critical-function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, we have a long tradition of providing reliable solutions through trusted customer relationships.

Further information is available from the Curtiss-Wright Industrial website (www.cw-industrialgroup.com) or by calling +44 (0)1202 034000.

Euchner (UK) Limited (www.euchner.co.uk)

Safety for people, machines and products has been the maxim of this family-owned company since 1953. Stefan Euchner is the third generation to take the helm.

As specialists in industrial safety engineering, Euchner develops and manufactures products and solutions tailored to the requirements of customers from a wide range of sectors. Using its guards on machines and installations helps to minimise hazards and risks, which in turn protects people and processes. For its 800 employees around the world, safety is the watchword.

Further information is available from the Euchner (UK) Limited website (www.euchner.co.uk) or by calling +44 (0)114 256 0123.

Industry Superstore (www.industrysuperstore.co.uk)

Industry Superstore is a one-stop-shop for a wealth of budget-friendly, high-quality products tailored to industry!

Further information is available from the Industry Superstore website (www.industrysuperstore.co.uk) or by calling +44 (0)1892 664499.

Exmac Automation Limited has many years experience in the design, manufacture, and installation of unit conveyors, conveyor systems and associated materials handling equipment for most industry sectors.

Exmac Automation is part of the MacDonald Humfrey group of companies and are market leaders in the supply of automated materials handling equipment to the automotive, aerospace, white goods, warehouse & distribution, nuclear, pharmaceutical and food & beverage industries.

The group supplies to most industry sectors and have over 250 employees with many years experience in the design, manufacture and installation of unit conveyors, conveyor systems and associated materials handling equipment.

Projects have ranged from individual standard conveyors and bespoke handling applications, through to complete turnkey contracts involving conceptual and process design, installation and commissioning.

We are ISO 9001 accredited and constantly strive to achieve continuous improvements in the overall quality of our products and service.

Exmac Automation has has established a reputation for supplying high quality, robust systems at competitive prices.

In-house resources enable us to provide clients with a single source for complete systems integration including simulation, engineering, machining, fabrication, assembly, controls, installation & commissioning and after sales service.

Our 70,000 sq ft facility in Worcester has extensive design, manufacturing and assembly resources. Our skilled team of customer focussed automation professionals offers a broad base of knowledge and experience in a wide variety of industries.

A large workshop enables us to carry out comprehensive pre-installation assembly and factory acceptance tests on all projects.

Fulton Limited (www.fulton.co.uk)

The Fulton name has been synonymous with steam since the company first introduced the vertical tubeless steam boiler in 1949 and Fulton was established in Bristol in 1966. Fulton is still one of the world’s leading manufacturers, producing an unrivalled range of multi-fuel steam boilers. But increasingly these are ordered by customers as part of bespoke turnkey systems designed to meet exacting specifications.

Today Fulton Limited is an important design and manufacturing base in Fulton’s global network that also includes production facilities in the USA and China. The company’s UK facility makes it possible to manufacture products more efficiently and assemble completed units for whenever and wherever they are needed throughout the UK and in export markets.

Once just a steam boiler manufacturer, Fulton now specialises in ready-to-ship skid mounted and fully packaged boiler plant rooms to meet the current demand for off-site fabrication. The company puts great emphasis in providing sales and application advice and a full commissioning and after sales service to a growing customer base in hospital and healthcare facilities, food and beverage processing, laundries and other applications.

Design and manufacturing resources are shared and coordinated around the world, but no matter where your product originates, it will always be produced to the highest quality in a facility that is wholly owned and managed by the Fulton Group, which remains a privately owned family business.

Fulton’s heating and hot water systems can be delivered as fully prefabricated plant rooms or complete skid-mounted units, built to fit a prepared location and connect direct to your services.

Using the latest CAD equipment its design team can accommodate the most sophisticated engineering specifications in surprisingly compact spaces, locating components in the best possible position to suit the installation.

In every sense, today’s Fulton boiler systems are solutions that fit the requirements of the modern age of steam.

Gast Group (www.gastmfg.com / www.jun-air.com)

Since 1921, Gast Manufacturing, Inc. has been designing and manufacturing quality air-moving products. Our vacuum pumps, compressors, air motors, gear motors, vacuum generators, regenerative blowers and Smart Air technology meet the many challenging applications of OEMs and end-users worldwide.

For industrial manufacturing, health care lab, or environmental cleanup applications, Gast provides a full range of ideally suited and cost-effective solutions to any pneumatic problem.

Monodraught (www.monodraught.com)

In the current climate of soaring energy prices and the fear of global warming, increasing attention is being focused on Monodraught’s range of energy-free products.

Monodraught has always sought to invent, explore and develop innovative technologies that harness the wind and sun. Products include Windcatchers, Sunpipes, Suncatchers, Sola-vents, Sola-boosts and Cool-phase.

Nexen Lift Trucks (www.nexenlifttrucks.com)

Disillusioned with the ever-increasing complexity of new forklift trucks and the failure of the major manufacturers to provide a high level of support to their dealer networks, the decision was taken to develop its own range of forklifts.

In 2003 Nexen Lift Trucks was established with the vision to design and manufacture its own range with a combined 70 years experience of the lift truck rental industry. Nexen's ultimate goal is to build worldwide brand recognition based on its product's design and build quality as well as outstanding reliability at competitive prices.

In 2007 Nexen completed the purchase of the second largest lift truck manufacturer in Taiwan, creating the Nexen Motor Corporation. Initially the existing models were improved whilst a European based design team was established to develop a completely new range of trucks from the ground up to meet Nexen's standards.

Q8Oils (www.Q8Oils.co.uk / @Q8OilsUK)

Q8Oils has become a major player in the global lubricants market. Our success is founded on significant corporate resources, a commitment to product development and uncompromising standards of quality and service.

Q8Oils has a unique and innovative approach producing some of the world´s finest quality lubricants. Manufactured in its state of the art plant at Leeds, West Yorkshire, Q8Oils represent the very best and latest in lubricant technology. With over 1000 grades of finished lubricants, base oils, process oils, extracts and waxes.

We are dedicated to serving the needs of our customers by striving to understand, anticipate and satisfy their needs faster and better than our competitors. To achieve this our objective is to develop and supply products and services which reflect customer demands in each of our market sectors.

TLV Euro Engineering (www.tlv.co.uk)

TLV Euro Engineering UK is part of TLV, an internationally-established designer, manufacturer and provider of steam traps, condensate recovery pumps, pressure reducing valves and other specialist steam solutions. The company plays a leading role in the promotion of efficient energy systems and increased environmental conservation on a worldwide scale through its products and consulting and engineering services.

Rockatek (www.rockatek.com)

Cheltenham-based Rockatek Ltd is an engineering consultancy that offers design, analysis and physical testing services that set it apart from others. Its directors have over 40 years’ experience in complex engineering product optimisation and development; and its engineers specialise in engineering solutions for harsh environments and value improving reliability and performance.

Verco (www.ver.co.uk)

Founded in 1965, Verco quickly built a reputation for supplying quality refrigerated glass door and open chill cabinets to supermarkets, convenience and forecourt stores. Verco is now a leading supplier of retail refrigeration and the largest UK manufacturer of glass door cabinets.