Boiler house risk assessments. Do you know your responsibilities?

Wed, Feb 24, 2021

In this article, Fulton’s aftercare and business development manager Jeff Byrne takes a look at technical boiler house risk assessments, from their legalities to the potential savings that can be achieved.

It is strongly advised that all companies with a steam boiler have a technical risk assessment in place for its boilers and boiler house. It is required by law under the Management of Health & Safety at Work Regulations 1999 and is necessary to comply with the requirements of SAFed document BG01, HSE INDG 436 and HSE INDG 417 Rev1, under which steam or hot water plant should be operated.

Why do you need a Technical Boiler House Risk Assessment?

Besides the legal requirement, a faulty steam boiler brings with it the risk of a steam explosion. With significant stored energy, failure of steam (or pressurised hot water boiler plant) can produce a similar level of destruction and/or devastation as a bomb, potentially causing catastrophic damage, serious injury and possibly multiple fatalities. With around 100 pressure vessel failures and at least one fatality per annum in the UK (HSE RIDDOR 2014), the importance of a technical boiler house risk assessment (TBHRA) cannot be overstated.

So, a TBHRA is therefore essential for owners, operators and managers to ensure that staff are aware of the risks and their responsibilities for the safe operation and management of industrial steam and hot water boiler plant. It is also likely to be the first thing a HSE inspector would ask to see in the event of an inspection.

A TBHRA is also a vital link in the safety chain to identify risk and develop measures to mitigate those risks, thus ensuring the safety of all involved with the plant.

We simply cannot stress the importance of the TBHRA enough, because non-compliance with the law can result in substantial fines and the likelihood of a custodial sentence in the event of serious injury or a fatality.

The Fulton approach to TBHRAs

Fulton’s method with the TBHRA requirement is to take a very collaborative approach with its clients; and use only experienced steam boiler and steam system engineers with over 60 years’ knowledge of not just steam boilers, but steam, water and condensate systems.

This highly-experienced team will scrutinise and photograph every area of risk and will produce a full report proposing and prioritising mitigation measures. This will give owners, operators and managers peace of mind that their plant may be operated safely and that all relevant guidance and legislation is supported once any identified hazards are rectified.

What are the typical findings of a TBHRA?

Unlike a vehicle MOT, a TBHRA does not pass or fail a steam system, but instead highlights hazards and the potential risk and then proposes measures to rectify any issues.

According to INDG 436 “a risk assessment does not need to include excessive detail”, but issues highlighted can include boiler specification, location, operation and condition, poor record keeping, lack of suitable/relevant training or trained operator absence cover, shortage of plant drawings and manuals, control system reliability, ventilation issues, poor/no suitable operational procedures, water quality issues, etc.

Beyond the TBHRA?

Once its assessment is completed and delivered, there is no commitment by the customer to involve Fulton in any post-assessment remedial works. But the document does highlight areas of the steam system that require attention and will prioritise the risk they pose from high priority (red) to lower priority (green). The assessment must also be made available to the boiler operator and, in the event of the sale of equipment, the new owner/operator.

However, unlike a MOT, a TBHRA is a live document that should be updated on an ongoing basis when any changes or modifications affecting the operation of a boiler occurs. This can include personnel changes, additional training, physical changes including boiler/burner upgrades, legislation amendments, etc.

Fulton can offer support to the customer once the TBHRA has been completed, or during or after the annual review. This support can be provided onsite or via telephone or video conference assistance once the review is completed.

A TBHRA also offers excellent value for money because it not only highlights areas of potential risk for owners, operators and managers, but can also identify where enhancements to the steam system could lead to improved energy efficiency. For example, the cost to replace an old, inefficient or dangerous burner could easily be offset within a few years by the fuel savings achieved through the upgrade.

For further information on Fulton’s technical boiler house risk assessment package, call the office on +44 (0)117 972 3322, email aftercare@fulton.co.uk or visit www.fulton.co.uk.

Share and subscribe

MEDIA

Show all Media

Quotes

External Links

Fulton Limited

About Us

Advanced Insulation (www.aisplc.com)

Since its formation in 2007, Advanced Insulation has become a single source provider for insulation and fire protection systems to the oil and gas industry, and represents one of the most respected and progressive names in topside and subsea insulation worldwide.

Advanced Insulation offers a wide range of products to meet the growing demand for fire protection and thermal insulation systems adaptable for elevated service temperatures and pressures.

AL-KO Kober (www.al-ko-co.uk)

Since 1931, AL-KO Kober has been manufacturing premium, high quality components used in the Automotive, Commercial and Leisure industry.

The extensive range of chassis components, premium accessories and spare parts are engineered to last, ensuring whatever product you have purchased, you will benefit from the generations of development and enjoy a lifetime of service.

Arc Energy Resources (www.arcenergy.co.uk)

Arc Energy Resources is one of the UK’s leading specialists in weld overlay cladding and fabrication for the oil & gas industry. The company’s expertise provides protection against corrosion and wear for a variety of process and pipeline equipment for use in any hostile environment.

The company recently made a major investment in two new Rotating Head welding machines costing £500,000. This has increased productivity and extended the size and scope of work it can handle, which now includes complicated component geometries for the full or partial cladding and fabrication of a huge range of component sizes weighing up to 15 tonnes. The company’s in-house designed cladding workstations feature state-of-the-art control systems developed to suit its customer’s specialised engineering requirements, and can clad bores up to four metres diameter and areas of restricted access within bores as small as 20mm diameter. Arc Energy also offers in-house test weld, heat treatment, PMI and NDT facilities.

Industry certifications include ISO 9001:2008 quality management, ISO 3834-2 fusion welding of metallic materials, and the internationally renowned ASME U and R Stamps, as well as ISO 14001:2004 environment management, Investors in People and OHSAS 18001:2007 Health & Safety management system.

Curtiss-Wright Industrial Group, which includes the legacy brands of Arens Controls, Penny & Giles, PG Drives Technology and Williams Controls, is a recognized leader in providing components and sub-systems which enable customer specific solutions for on- and off-highway vehicles. These include medium- and heavy-duty trucks, buses and motor coaches, construction and agricultural vehicles, materials handling, and other specialty vehicles, as well as sophisticated wheelchairs and scooters for medical mobility.

We are a leading provider of electronic throttle controls, transmission shifters and sensors for commercial off-highway equipment and heavy trucks, so helping to address the long-term trend towards attaining higher fuel efficiency and lower emissions. We also supply operator controls and advanced motor controllers for hybrid and electric vehicles, such as buses, forklift trucks, pallet stackers, wheelchairs and rehabilitation chairs.

With a proud legacy spanning more than 85 years, Curtiss-Wright is a global innovative company that delivers highly-engineered, critical-function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, we have a long tradition of providing reliable solutions through trusted customer relationships.

Further information is available from the Curtiss-Wright Industrial website (www.cw-industrialgroup.com) or by calling +44 (0)1202 034000.

Euchner (UK) Limited (www.euchner.co.uk)

Safety for people, machines and products has been the maxim of this family-owned company since 1953. Stefan Euchner is the third generation to take the helm.

As specialists in industrial safety engineering, Euchner develops and manufactures products and solutions tailored to the requirements of customers from a wide range of sectors. Using its guards on machines and installations helps to minimise hazards and risks, which in turn protects people and processes. For its 800 employees around the world, safety is the watchword.

Further information is available from the Euchner (UK) Limited website (www.euchner.co.uk) or by calling +44 (0)114 256 0123.

Industry Superstore (www.industrysuperstore.co.uk)

Industry Superstore is a one-stop-shop for a wealth of budget-friendly, high-quality products tailored to industry!

Further information is available from the Industry Superstore website (www.industrysuperstore.co.uk) or by calling +44 (0)1892 664499.

Exmac Automation Limited has many years experience in the design, manufacture, and installation of unit conveyors, conveyor systems and associated materials handling equipment for most industry sectors.

Exmac Automation is part of the MacDonald Humfrey group of companies and are market leaders in the supply of automated materials handling equipment to the automotive, aerospace, white goods, warehouse & distribution, nuclear, pharmaceutical and food & beverage industries.

The group supplies to most industry sectors and have over 250 employees with many years experience in the design, manufacture and installation of unit conveyors, conveyor systems and associated materials handling equipment.

Projects have ranged from individual standard conveyors and bespoke handling applications, through to complete turnkey contracts involving conceptual and process design, installation and commissioning.

We are ISO 9001 accredited and constantly strive to achieve continuous improvements in the overall quality of our products and service.

Exmac Automation has has established a reputation for supplying high quality, robust systems at competitive prices.

In-house resources enable us to provide clients with a single source for complete systems integration including simulation, engineering, machining, fabrication, assembly, controls, installation & commissioning and after sales service.

Our 70,000 sq ft facility in Worcester has extensive design, manufacturing and assembly resources. Our skilled team of customer focussed automation professionals offers a broad base of knowledge and experience in a wide variety of industries.

A large workshop enables us to carry out comprehensive pre-installation assembly and factory acceptance tests on all projects.

Fulton Limited (www.fulton.co.uk)

The Fulton name has been synonymous with steam since the company first introduced the vertical tubeless steam boiler in 1949 and Fulton was established in Bristol in 1966. Fulton is still one of the world’s leading manufacturers, producing an unrivalled range of multi-fuel steam boilers. But increasingly these are ordered by customers as part of bespoke turnkey systems designed to meet exacting specifications.

Today Fulton Limited is an important design and manufacturing base in Fulton’s global network that also includes production facilities in the USA and China. The company’s UK facility makes it possible to manufacture products more efficiently and assemble completed units for whenever and wherever they are needed throughout the UK and in export markets.

Once just a steam boiler manufacturer, Fulton now specialises in ready-to-ship skid mounted and fully packaged boiler plant rooms to meet the current demand for off-site fabrication. The company puts great emphasis in providing sales and application advice and a full commissioning and after sales service to a growing customer base in hospital and healthcare facilities, food and beverage processing, laundries and other applications.

Design and manufacturing resources are shared and coordinated around the world, but no matter where your product originates, it will always be produced to the highest quality in a facility that is wholly owned and managed by the Fulton Group, which remains a privately owned family business.

Fulton’s heating and hot water systems can be delivered as fully prefabricated plant rooms or complete skid-mounted units, built to fit a prepared location and connect direct to your services.

Using the latest CAD equipment its design team can accommodate the most sophisticated engineering specifications in surprisingly compact spaces, locating components in the best possible position to suit the installation.

In every sense, today’s Fulton boiler systems are solutions that fit the requirements of the modern age of steam.

Gast Group (www.gastmfg.com / www.jun-air.com)

Since 1921, Gast Manufacturing, Inc. has been designing and manufacturing quality air-moving products. Our vacuum pumps, compressors, air motors, gear motors, vacuum generators, regenerative blowers and Smart Air technology meet the many challenging applications of OEMs and end-users worldwide.

For industrial manufacturing, health care lab, or environmental cleanup applications, Gast provides a full range of ideally suited and cost-effective solutions to any pneumatic problem.

Monodraught (www.monodraught.com)

In the current climate of soaring energy prices and the fear of global warming, increasing attention is being focused on Monodraught’s range of energy-free products.

Monodraught has always sought to invent, explore and develop innovative technologies that harness the wind and sun. Products include Windcatchers, Sunpipes, Suncatchers, Sola-vents, Sola-boosts and Cool-phase.

Nexen Lift Trucks (www.nexenlifttrucks.com)

Disillusioned with the ever-increasing complexity of new forklift trucks and the failure of the major manufacturers to provide a high level of support to their dealer networks, the decision was taken to develop its own range of forklifts.

In 2003 Nexen Lift Trucks was established with the vision to design and manufacture its own range with a combined 70 years experience of the lift truck rental industry. Nexen's ultimate goal is to build worldwide brand recognition based on its product's design and build quality as well as outstanding reliability at competitive prices.

In 2007 Nexen completed the purchase of the second largest lift truck manufacturer in Taiwan, creating the Nexen Motor Corporation. Initially the existing models were improved whilst a European based design team was established to develop a completely new range of trucks from the ground up to meet Nexen's standards.

Q8Oils (www.Q8Oils.co.uk / @Q8OilsUK)

Q8Oils has become a major player in the global lubricants market. Our success is founded on significant corporate resources, a commitment to product development and uncompromising standards of quality and service.

Q8Oils has a unique and innovative approach producing some of the world´s finest quality lubricants. Manufactured in its state of the art plant at Leeds, West Yorkshire, Q8Oils represent the very best and latest in lubricant technology. With over 1000 grades of finished lubricants, base oils, process oils, extracts and waxes.

We are dedicated to serving the needs of our customers by striving to understand, anticipate and satisfy their needs faster and better than our competitors. To achieve this our objective is to develop and supply products and services which reflect customer demands in each of our market sectors.

TLV Euro Engineering (www.tlv.co.uk)

TLV Euro Engineering UK is part of TLV, an internationally-established designer, manufacturer and provider of steam traps, condensate recovery pumps, pressure reducing valves and other specialist steam solutions. The company plays a leading role in the promotion of efficient energy systems and increased environmental conservation on a worldwide scale through its products and consulting and engineering services.

Rockatek (www.rockatek.com)

Cheltenham-based Rockatek Ltd is an engineering consultancy that offers design, analysis and physical testing services that set it apart from others. Its directors have over 40 years’ experience in complex engineering product optimisation and development; and its engineers specialise in engineering solutions for harsh environments and value improving reliability and performance.

Verco (www.ver.co.uk)

Founded in 1965, Verco quickly built a reputation for supplying quality refrigerated glass door and open chill cabinets to supermarkets, convenience and forecourt stores. Verco is now a leading supplier of retail refrigeration and the largest UK manufacturer of glass door cabinets.