Curtiss-Wright’s Industrial division today announced the launch of the NRH305DR, a new ‘no-contact’ rotary position sensor that extends the company’s portfolio of position sensors and offers an optimal combination of performance, safety and cost for OEMs designing vehicles and control systems.
Sharing many of the same features and benefits as the NRH300DP model launched in 2016, the new NRH305DR rotary position sensor – from the Penny & Giles brand family – enhances system performance by incorporating two completely independent power supplies and output channels for full electrical redundancy, operating from a 5Vdc regulated supply.
With an 8mm low-profile sensor body and small footprint, this fully-encapsulated, IP68/IP69K-rated sensor offers exceptional levels of performance against water, dust, shock, vibration and temperature. The separate magnet assembly that activates the sensor can have a permissible air gap between 1.5mm and 8mm (depending on magnet style) and can accommodate up to ±2mm radial offset to ease setup and installation.
Versatile, factory-programmable electronics can be easily set to one of two analog voltage output ranges or one of three PWM frequencies. Additionally, the polarities of each of the analog outputs can be independently set, with on-board diagnostic functions ensuring the outputs are put into safe, pre-defined states should an internal sensor error be detected.
Features and benefits of the NRH305DR include:
• No-contact design and sensing technology provides wear-free operation
• Can be factory set to correspond to rotations of 20° to 360° in 1° increments
• Industry-standard 38mm mounting centers – for easy replacement or upgrades
• Analog output from 0.5-4.5V or 0.2-4.8V
• Transmissive measurements can be made through non-magnetic materials
The new NRH305DR – which replaces the company’s legacy NRH285DR rotary position sensor – uses proven, wear-free Hall-effect sensing technology. The design features a number of magnet arrangement options, and includes an over-molded magnet carrier that simplifies the interfacing of the magnet and sensor during installation. Optional bolt, plug or loose carrier variations are also available.
Curtiss-Wright Industrial division has announced the launch of the JC1210, a single-axis paddle joystick that extends the company’s recently-introduced JC1200 family by incorporating latching and overpress functionalities and offering multiple mounting solutions in a single body. This makes the new joystick controller ideal for use in control panels and armrest assemblies found in material handling vehicles, industrial trucks, agricultural equipment and construction machinery, where cost-effective, long-life operator controls are essential.
Developed by Curtiss-Wright’s brand family of Penny & Giles, the JC1210 paddle joystick features an additional 10 degrees of travel at both ends of the axis, which can be specified by machine designers and end users for either latching or overpress functions – or a combination of both – to meet system requirements to hold functions at full speed/float.
By using a long-life bearing system and non-contacting Hall-effect sensing technology, the JC1210 has already been rated to 5 million cycles (to start of overpress/latching) while providing functionality that is smooth and easy to operate. A soft-touch colored insert area of the paddle – which has a choice of nine colors – increases operator comfort and decreases the likelihood of finger-slip during operation.
Key features of the JC1210 include:
• An under-panel depth of 9mm, requiring minimal installation space
• A spring-loaded return-to-center paddle movement
• Colored ergonomic soft-touch grip
• IP67 protection of internal electronics and joystick-to-panel
• Two mounting-panel fixing variations (center line or corners) in one body
Like the JC1200, the JC1210 paddle joystick launches with a 5Vdc supply voltage and the option for factory-programmable electronics configured to one of two analog voltage output ranges (0.5-4.5V or 1.0-4.0V). The three electrical termination options include an integrated Molex connector, a flying lead with Molex connector or header pins.
The option of paddle overpress and/or latch, electrical terminations, output sense, output voltages and paddle soft-touch colors means the JC1210 paddle joystick will be launched with over 600 variations.
Curtiss-Wright’s Industrial division has today announced that it will be using its stand (Stand B07, Hall 17) at Agritechnica 2017 to promote products from its family brands of Arens Controls, Penny & Giles, PG Drives Technology and Williams Controls.
Curtiss-Wright has relationships with many industry-leading OEMs and is highly-experienced in working with agricultural machinery designers to provide safety-critical components and sub-systems that can withstand environmental challenges (e.g. water, dust, shock, vibration and temperature extremes) and are ergonomically-optimized for efficient operator control that reduces fatigue and increases productivity.
For example, new vehicle cab designs have been adopting electronic Human-Machine Interfaces (HMI) that replace multiple hydraulic levers and discrete components, with fully-integrated armrest assemblies providing the vehicle operators/drivers with numerous new and existing capabilities.
And for many agricultural applications, Curtiss-Wright is developing vehicle controls designed to incorporate multiple functions that can be operated with the use of just one hand, finger or thumb. These controls typically incorporate push-button switches, rotary thumbwheels and joystick paddles and levers, which variously offer switched and proportional control of the vehicle’s numerous features.
• Arens Controls: Rapidly emerging as a global leader in the design and manufacture of precision operator interface control systems and power management systems for commercial on- and off-highway vehicles. The all-new WTI-Traction Inverter series offers state-of-the-art technology and innovative design for use in hybrid and pure-electric on- and off-highway applications. Other products include electronic and cable-operated shifters for controlling automatic and hydrostatic transmissions; and dual-axis, friction and single-action lever controls that are fully customizable with options including shaft orientation, sensor positions and knob color.
• Penny & Giles: Joystick controls – including its latest JC1210, JC040 and JC050 models – are available in single- and multi-axis configurations and can be specified with multiple handle options to provide proportional control within the HMI for numerous applications. The company’s linear, rotary, tilt and pressure sensors are also suitable for numerous agricultural vehicle applications.
• PG Drives Technology: Small electric vehicles benefit from the use of compact AC and DC motor controllers and systems. The i-Drive is a permanent magnet DC motor controller which is highly cost effective, but provides advanced traction control features for walk-behind machines and small material handling vehicles in the agricultural industry.
• Williams Controls: Products include robust suspended and floor-mounted electronic throttle controls, lever-operated and rotary electronic hand controls and cost-effective non-contact rotary position sensors for high volume applications. The heavy-duty WM-540HD suspended pedal is an example of an extremely durable pedal that provides outstanding performance for agricultural-based applications.
From the latest on- and off-highway commercial vehicles, to the rapidly developing hybrid and fully electric vehicle market, Curtiss-Wright engineers are focused on developing bespoke, innovative solutions and next generation technology. This intelligent engineering, from initial concept to finished product, demonstrates the Industrial division’s commitment to providing the advanced control and power management systems demanded by today's agricultural vehicle manufacturers.
With design and manufacturing capabilities in the USA, United Kingdom, China and India, Curtiss-Wright Industrial is well-placed as a global provider. Its many facilities makes it possible to manufacture products more efficiently and assemble completed units for whenever and wherever they are needed throughout the world. And its manufacturing capability is backed by sales and technical support teams in over 45 other countries, ensuring exceptional levels of efficiency, quality and on-time delivery.
Curtiss-Wright’s Industrial division today announced that it will be attending the REHACARE® International Trade Fair & Conference in Düsseldorf, Germany, and showcasing a range of medical mobility products, including the recently-launched CJSM2-BT joystick module from its PG Drives Technology family brand.
As one of four established specialist business units of Curtiss-Wright’s Industrial division, PG Drives Technology has been designing, manufacturing and marketing sophisticated mobility control systems for over 40 years and is now one of the world's foremost suppliers of these products.
New at this show will be the company’s recently-launched R-net CJSM2-BT, a Bluetooth- and infra-red-enabled version of its popular CJSM2 Joystick Module. Integrated Bluetooth technology enables wheelchair users to control personal computers, Android tablets, iPhones, iPads and other smart devices from the joystick module. The infra-red communication is widely used to remotely control household appliances such as TVs, DVD players and multi-media systems, as well as some home-automation equipment.
Also on display is the R-net LM, a Lighting Module that provides a compact and cost-effective solution providing 12V or 24V control of lamps. Lighting and turn-signal indicators are mandatory for most European markets and their safety requirements, which are based on the automotive industry, are tough to meet. Nevertheless, the LM complies with all relevant standards and includes features such as constant-brightness control of 12V lamps and turn-signal fault detection. The module is an ideal complement to the ISM-8 or Complex Seating Module (CxSM), when lighting control is needed in conjunction with high-specification seating.
To complete its impressive suite of mobility products, the company will also be showcasing its other LED and LCD Joystick modules for the R-net system, add-on modules for R-net, and the VR2 range of control systems, which set new standards of performance and value for mainstream wheelchair controllers.
Curtiss-Wright’s Industrial division today announced that it will be attending the 66th IAA Commercial Vehicles exhibition in Hannover, Germany, and showcasing solutions for the control and monitoring of vehicles, including applications throughout the on-highway commercial vehicle sector.
The Industrial division includes a number of established specialist business units with expertise in the design, testing and manufacture of a range of components and sub-system solutions for the safe and reliable operation and control of mobile and static machinery, including on- and off-highway vehicles, heavy trucks, buses, military vehicles and motorsport.
Arens Controls
Arens Controls designs and manufactures a range of operator interface control systems and power management products – including manual transmission shift controls, by-wire shift controls and shift-by-wire systems, power inverters and power distribution modules. Many of these systems can be found in applications for the specialist hybrid vehicle market and on today’s most advanced commercial vehicles including medium and heavy-duty trucks, school and transit buses, recreational vehicles and agricultural and off-highway equipment.
Penny & Giles
The extensive Penny & Giles range of rotary, tilt and linear position sensors offers angle measurements from 10° to 360°and length measurements from 5mm to 2000mm; they have been developed to meet the operating requirements of many position-sensing applications in the automotive and industrial sectors. Using Hall-effect, inductive or potentiometric technologies, sensors are packaged in compact or rugged housings with IP68 and IP69K environmental protections and mountings that give users a wide range of flexible installation options. The company also offers a range of solenoids and solenoid valves that include standard and configurable designs and styles that can be modified to suit specific applications or custom-designed for large scale OEM applications.
Williams Controls
Williams Controls is a global market leader in electronic throttle control systems for commercial, off-road, heavy-duty or recreational vehicle applications. The business also designs throttle systems to meet the most demanding specifications and its ergonomic designs include floor and firewall mounting configurations, optional kick down and customizable treadle covers. In addition, the company manufactures a standard range of electronic throttle controls that can minimize tooling costs for many applications. Williams Controls can also take basic ergonomic, dimensional, electrical and aesthetic requirements from OEMs; and provide a complete custom design service. The design, development and product qualification are all part of the customization process.
Curtiss-Wright’s Industrial division today announced that it will be attending the Electric & Hybrid Vehicle Technology Expo and promoting products from its legacy brands of Arens Controls and Williams Controls.
The Industrial division has extensive experience in designing and manufacturing solutions for the monitoring and control of vehicles, including applications throughout the on-highway commercial vehicle sector.
Agritechnica, Hannover Messe, November 2015 Stand A10, Hall 15
Curtiss-Wright Corporation today announced that its Industrial division will be using its stand at Agritechnica to promote products from its legacy brands of Arens Controls, Penny & Giles, PG Drives Technology and Williams Controls. With the industry moving away from discrete hydraulic controls, fully electronic operator controls such as those from Curtiss-Wright Industrial division – a recognized leader in providing components and sub-systems for a wide range of agricultural applications – offer huge improvements in reliability and operational comfort that can improve vehicle productivity and reduce operator fatigue.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 9,000 people worldwide. For more information, visit www.curtisswright.com.
Curtiss-Wright Corporation (NYSE: CW) today announced that its Industrial division will be attending this September’s REHACARE International Trade Fair & Conference in Düsseldorf, Germany. The Company will promote its PG Drives Technology business, showcasing a range of medical mobility products, including additions to the popular R-net and VR2 wheelchair control systems.
Curtiss-Wright’s Industrial division has extensive experience in designing and manufacturing solutions for the monitoring and control of vehicles, including applications throughout the on-highway commercial vehicle sector. As one of four established specialist business units, PG Drives Technology has been designing, manufacturing and marketing sophisticated mobility control systems since 1976 and is now one of the world's foremost suppliers of these products.
On display for the first time at REHACARE is the second-generation R-net joystick module, which sets new standards in user-interfaces. The module contains a large, hi-resolution, VGA display with stylish graphics, as well as mechanical paddle switches for ease of use, a light sensor to automatically set screen brightness and a loudspeaker to provide clear audible warnings.
In addition, new R-net modules for Gyro drive control and Bluetooth control of iDevices will be launched. The Gyro module allows for improved drive-performance and straight-line driving on front-wheel-drive configurations, while the iDevice module permits the R-net system to connect with iPhones and iPads, as well as Windows PCs and Android devices.
To complete this impressive suite of new products, a compact joystick module for the VR2 wheelchair control system is also being shown and, being the smallest available on the market and primarily targeted at wheelchairs for indoor use, allows operators a closer approach to tables and minimizes the risk of collision with doorways.
PG Drives Technology’s modern UK design and manufacturing site is backed by a fully-equipped sales and service facility in the USA and general support offices in Taiwan and Hong Kong. The company also boasts a global network of authorized service centers, systems integrators and distribution partners.
Curtiss-Wright’s Industrial division is a recognized leader in the production of critical controls and assemblies for specialty vehicles, including sensors, electronic throttle controls and joysticks. For further information about products and other innovative solutions available from Curtiss-Wright’s Industrial division, please visit www.cw-industrial.com or call +44 (0)1425 271444.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation (NYSE:CW) is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 10,000 people worldwide. For more information, visit www.curtisswright.com.
Curtiss-Wright Corporation (NYSE: CW) today announced that it will be attending this September’s 65th IAA Commercial Vehicles exhibition in Hannover, Germany. The Company will promote products from its Industrial division, which has extensive experience in designing and manufacturing solutions for the monitoring and control of vehicles, including applications throughout the on-highway commercial vehicle sector.
The Industrial division includes a number of established specialist business units with expertise in the design, testing and manufacture of a range of components and sub-system solutions for the safe and reliable operation and control of mobile and static machinery including on- and off-highway vehicles, heavy trucks, buses, military vehicles and motorsport.
Arens Controls
Arens Controls designs and manufactures a range of operator interface control systems and power management products – including manual transmission shift controls, by-wire shift controls and shift-by-wire systems, power inverters and power distribution modules. Many of these systems can be found in applications in the rapidly developing hybrid vehicle market and on today’s most advanced commercial vehicles including medium and heavy-duty trucks, school and transit buses, recreational vehicles, and agricultural and off-highway equipment.
Penny + Giles
The extensive Penny & Giles range of rotary, tilt and linear position sensors offers angle measurements from 10° to 360°and stroke length measurements from 5mm to 2000mm; they have been developed to meet the operating requirements of many position-sensing applications in the automotive and industrial sectors. Using Hall-effect, inductive or potentiometric technologies, sensors are packaged in compact or rugged housings with IP68 and IP69K environmental protections and mountings that give users a wide range of flexible installation options. The company also offers a range of solenoids and solenoid valves that include standard and configurable designs and styles that can be modified to suit specific applications or custom-designed for large scale OEM applications.
Williams Controls
Williams Controls is a global market leader in electronic throttle control systems for commercial, off-road, heavy-duty or recreational vehicle applications. The business also designs throttle systems to meet the most demanding specifications and its ergonomic designs include floor and firewall mounting configurations, optional kick down and customizable treadle covers. In addition, the company manufactures a standard range of electronic throttle controls that can minimize tooling costs for many applications. Williams Controls can also take basic ergonomic, dimensional, electrical and aesthetic requirements from OEMs; and provide a complete custom design service. The design, development and product qualification are all part of the customization process.
Curtiss-Wright’s Industrial division is a recognized leader in the production of critical controls and assemblies for specialty vehicles, including sensors, electronic throttle controls and joysticks. For further information about products and other innovative solutions available from Curtiss-Wright’s Industrial division, please visit www.cw-industrial.com or call +44 (0)1425 271444.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation (NYSE:CW) is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 10,000 people worldwide. For more information, visit www.curtisswright.com.
