It’s a double celebration for Fulton at Foodex 2016, as the company will be celebrating 50 years of UK manufacturing and using its stand to launch its latest heat transfer solution, the all-new, next-generation SRT Series.
Commenting for Fulton, sales and marketing manager Doug Howarth says: “This will be quite a year for Fulton. Not only are we celebrating 50 years of manufacturing in the UK, but we’re also launching a great new heat transfer solution that we believe to be the most radical change in steam boiler design since we pioneered the vertical tubeless boiler in 1949!”
By adopting a systems engineering approach to design and using its own ‘PURE’ technology, Fulton’s SRT Series challenges the heat transfer and mechanical design principles of traditional vertical steam boilers.
With over 30 worldwide patents pending, the new vertical boiler’s spiral-rib tubeless design is a world first that has enabled Fulton to create a compact boiler with the industry’s smallest footprint. In fact, compared to the equivalent 30hp model from the company’s renowned J Series, the SRT Series is an impressive 40% smaller.
Using a combination of in-house modelling with computational fluid dynamics and finite element analysis, the ‘PURE Optimised’ design of the SRT Series makes the new boiler durable and reliable in operation; and with up to 6:1 turndown and featuring a fully-modulating burner, the SRT also boasts industry-leading performance with an 84.5% Gross (93.5% Net) thermal efficiency and 99.5% steam quality from a fully-water-backed design with no refractory.
The SRT Series features patented, self-compensating stress relief architecture that virtually removes longitudinal stress and deflection absorption. And, to comply with anticipated EU regulations, the boiler’s combustion technology has also been completely reconfigured, with the mesh burner and furnace designed as a single component, resulting in ultra-low NOx emissions of less than 40mg/kWh.
Fulton has further reason to celebrate at Foodex, as 2016 sees the company celebrate 50 years of UK manufacturing, with the Bristol-based facility now an important design and manufacturing base in Fulton’s global network, which includes production facilities in the USA and China.
As Doug Howarth explains, Fulton concentrated on steam boiler manufacturer for many years, but the company is now a major solutions-based provider specialising in fully-packaged, ready-to-ship steam, hot water and thermal fluid heat transfer systems.
“We put great emphasis on providing sales and application advice and a full commissioning and after sales service, to a growing customer base in numerous sectors including food processing, brewing and distilling, etc.” says Doug.
For further information on the SRT Series, call Fulton on 0117 972 3322, email sales@fulton.co.uk or visit Fulton’s new-look website at www.fulton.co.uk.
Curtiss-Wright’s Industrial division today announced that it has launched a new non-contact, rotary position sensor from its brand family of Williams Controls.
The WM-830 is a cost-effective, non-contact rotary position sensor that uses proven Hall-effect technology to provide accurate and reliable measurement of angular position. Its mechanical, ruggedized design offers exceptional levels of performance against water, dust, shock, vibration and temperature.
Benefits of the WM-830 rotary position sensor include:
The WM-830 operates from a 5Vdc supply and has dual integrated circuits that are electrically isolated to provide two truly independent voltage signals, allowing the host electronics to detect output errors. In the event of connection errors, the sensor outputs enter pre-defined states, providing further integrity. Mechanical engagement with the rotating portion of the sensor is via a slotted cavity.
The sensor is ideal for use by OEMs of on- and off-highway vehicles that are destined for use in challenging environments, and as a cost-effective solution for medium volume applications where a small degree of customization may be required.
Sales inquiries: Please forward all sales and reader service inquiries to cwig.uk@curtisswright.com.
For more information on Curtiss-Wright Industrial division products, please visit www.cw-industrialgroup.com or call +44.1425.271444.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 9,000 people worldwide.
Curtiss-Wright’s Industrial division today announced it has launched the WM-554, a compact, lightweight and cost-effective electronic suspended pedal from the Corporation’s brand family of Williams Controls.
Featuring a non-contact, Hall-effect sensor that can be factory-programmed for dual analog output (APS), the WM-554 suspended pedal provides smooth driver operation and is available with a standard pedal travel of 19 degrees. The WM-554’s lever arm and mounting bracket can be customized to assist installation and optimize driver ergonomics in the vehicle cab environment.
Key features of the WM-554 include:
The WM-554 launches with a 5Vdc supply voltage, including electronics that are fully compliant with industry-standard electro-magnetic emission regulations (SAE J1113).
The new pedal assembly uses a corrosion resistant, coated steel mounting bracket and high-strength composite plastics for the body and pedal arm. This creates a highly-ruggedized and lightweight construction, making the WM-554 ideal for all industrial and commercial on- and off-highway vehicle applications, including medium-duty trucks and vans, buses, recreational ATV’s, military and construction vehicles.
Sales inquiries: Please forward all sales and reader service inquiries to cwig.uk@curtisswright.com.
For more information on Curtiss-Wright Industrial division products, please visit www.cw-industrialgroup.com or call +44.1425.271444.
About Curtiss-Wright Corporation
Curtiss-Wright Corporation is a global innovative company that delivers highly engineered, critical function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, Curtiss-Wright has a long tradition of providing reliable solutions through trusted customer relationships. The company employs approximately 9,000 people worldwide.
Curtiss-Wright’s Industrial division today announced it has launched a new non-contact, rotary position sensor from its brand family of Penny & Giles.
With an 8mm low-profile sensor body and a small footprint, this fully-encapsulated, IP68/IP69K-rated sensor offers exceptional levels of performance against water, dust, shock, vibration and temperature. The NRH300DP is ideal for use by OEMs of on- and off-highway vehicles that are destined for use in challenging environments, and as a cost-effective solution for medium volume applications where a select number of options or degree of customization may be required.
Benefits of the new NRH300DP rotary position sensor include:
Additonal features include an innovative circuit design that allows the rotary position sensor to be powered from a regulated 5V supply or a varying voltage – such as a vehicle’s battery – in the range of 9 to 30V. Versatile, factory-programmable electronics can also be easily set to one of two analog voltage output ranges (0.5-4.5V or 0.2-4.8V) or one of three PWM frequencies.
The NRH300DP uses proven, wear-free Hall-effect sensing technology and replaces the NRH280DP for new applications. The new design features a number of magnet arrangement options, and includes an over-molded magnet carrier that simplifies the interfacing of the magnet and sensor during installation. Optional bolt, plug or loose carrier variations are also available
As part of a move to enhance its UK sales operations, heat transfer specialist Fulton has appointed Andrew Robinson as national business development manager and restructured its existing territories.
Andrew Robinson joins Fulton with significant experience in the industry, having worked for numerous steam specialists including Spirax Sarco, Byworth and, more recently, Torishima. He will be responsible for driving new sales of Fulton’s steam, hot water and thermal oil products and will take overall responsibility for many of the company’s larger heat transfer projects.
Commenting for Fulton, managing director Carl Knight says: “With new products being launched to the market imminently, Andrew joins the company at an exciting time and his experience and knowledge of heat transfer systems are of real value when advising Fulton customers.”
With the retirement of Keith Williams as area sales manager, Fulton has also taken the opportunity to restructure its existing sales territories in England, with Ruth Price taking responsibility for the North of England and North Wales, Andrew Elverd the South West and South Wales and Dean Jones the East Midlands and South East. Nicol Boilers, Energia Technologies and Concord Boiler Engineering will continue to represent Fulton in Scotland, Northern Ireland and the Republic of Ireland respectively.
Andrew Robinson can be contacted via Fulton’s Bristol headquarters on 0117 972 3322, by email on andrew.robinson@fulton.co.uk, or via www.fulton.co.uk.
Leeds, UK – Industrial lubricant specialistQ8Oils has strengthened its UK-based sales team with the appointment of Scott Shields as area sales manager for the metal manufacturing sector in Scotland. A sales, marketing and recruitment professional in the manufacturing and high-technology sectors for over 19 years, Scott joins the company with a proven track record in the oil and gas sector, including high-level divisional and managerial roles.
Commenting on his new position, Scott believes that his experience has prepared him for this position and that capitalising on skills such as new account development through industry contacts and networking, will help him make a positive contribution to the Q8Oils sales team. “I have built strong working relationships that have lasted for a number of years thanks to working closely with clients to help satisfy their requirements by identifying the appropriate product or service at a mutually-beneficial cost.” says Scott.
Scott will be responsible for developing and retaining new and existing accounts and ensuring that agreed financial volume targets are achieved.
Commenting for Q8Oils, direct sales manager Jeremy Dineen says: “Scott has a real understanding of the territory both geographically and financially, which is imperative to maximise profitability within the dedicated area. With the plans we have in place for the short- to medium-term future, Scott’s broad experience in the oil and gas sector levels will provide him and us with real opportunities.”
Scott’s appointment follows a recent restructuring of Q8Oils’ UK operations, which has allowed the company to further expand its business and provide a long term commitment to the manufacturing, automotive and energy sectors.
Farnborough. 9-11 February 2016. Stand T134.
Q8Oils will be using its stand at Southern Manufacturing 2016 to promote its many recently-launched products and service-led initiatives available for the UK market.
Since Q8 Brunel was launched in early 2015, Q8Oils has continued development of its revolutionary water-soluble machining and grinding fluid and can now offer ten grades in the range that have been developed to out-perform all other fluids. All grades are suitable for use in hard or soft water, with ultra low foaming properties and are ideal for high-speed machining applications and the demanding fluid delivery pressures found on modern machine tools. The range is also designed to be fully-compliant with the latest European industry legislation.
Another product being promoted at the show is Q8 Berlioz, a range of soluble cutting and grinding fluids developed to be tolerant to both hard and soft water and free of formaldehyde, chlorine and secondary amines. Each of the six grades in the range has been specifically formulated for the light- to heavy-duty machining of numerous ferrous and non-ferrous metals and alloys on CNC machines, machining centres, flexible manufacturing systems and all centralised systems.
With the company so confident in its new grades and existing portfolio of neat and soluble cutting fluids, Q8Oils will continue to promote its ‘Challenge’ initiative which, launched in early 2015, offers new customers the opportunity to trial Q8 metal working fluids in their own machine shopson a payment-by-results basis.
Another service-led initiative being promoted is QCare, a network-enabled, tablet-based system with a bespoke ‘app’ that enables Q8Oils field service technicians (FSTs) to monitor fluids, complete audits and deliver results while still on site.
For further information on Q8 Brunel and Q8 Berlioz, or if you are interested in taking The Challenge, visit Q8Oils where its team can determine which Q8 metal working fluid is right for your application.
Gloucestershire-based Advanced Insulation, a leading manufacturer of specialist passive fire protection and thermal insulation for the upstream oil and gas industry, has appointed Richard Lane as Sales Manager for its Covertherm business unit.
Richard’s UK-based role makes him responsible for the sales and development of Advanced Insulation’s ContraFlex® range of bespoke insulation and passive fire protection jackets, which are used to provide high-performance thermal insulation and protection from jet and/or hydrocarbon fire to equipment requiring frequent maintenance access.
Commenting on his appointment, Richard says: “I have a proven track record of working for HVAC and Industrial Insulation based manufacturers, during which time I have developed new markets and established key working relationships. I am therefore looking forward to using my skills, experience and enthusiasm to champion the ContraFlex range in the UK.”
Covertherm Managing Director Paul Kendrick says: “Richard is a welcome addition to the team and his experience will be fundamental in helping to bring ContraFlex to new UK and export markets. His appointment comes at a time when the company has been steadily reversing a trend that saw manufacturers looking abroad for low-cost production solutions for passive fire protection jackets.”
Established in 2009 and acquired by Advanced Insulation in 2015, Covertherm’s range of bespoke thermal insulation jacket and cover solutions provide exceptional heat savings and are well aligned to complement the ContraFlex range of flexible fire protection jackets. These include high-temperature, acoustic, leak detection and thermal insulation solutions for numerous applications, with optional integral heat tracing insulation jackets also available.
To find out more about Advanced Insulation’s products and services, visit http://www.aisplc.com or email info@aisplc.com.
Gloucestershire-based Advanced Insulation – a leading manufacturer of specialist passive fire protection and thermal insulation materials for the upstream oil and gas industry; and manufacturer and supplier of fendering and buoyancy products for the global marine and offshore energy markets – is sponsoring a subsea supply-chain networking event taking place at Bristol’s Armada House on 27th January 2016.
Organised by Subsea UK, the body representing the £9billion British subsea industry, the event will give approximately 40 South West-based businesses operating in the subsea sector the chance to identify opportunities and debate the challenges facing the oil & gas, defence, oceanology and marine renewables markets.
Supported by UK Trade & Investment South West, Advanced Insulation will be co-sponsoring the event with Castrol - Global Marine & Energy Lubricants, Agito Technical Dynamics, Rochling Plastics and Viper Subsea Technologies; and the company’s Global Sales Manager (SURF), Guy Downie, will also be giving a presentation on its subsea buoyancy and SURF solutions.
Boasting over 320 members, Subsea UK is a self-sustaining body championing the UK’s subsea supply chain and acting as a focal point to promote the sector, maximise its opportunities and provide a national forum for collaboration, diversification and technology development.
Commenting for Subsea UK, chief executive Neil Gordon says: “As an organisation covering the whole of the UK, we want to help all companies in the subsea sector exploit the potential to increase business at home and abroad, particularly in the current lower oil price environment. There is a huge amount of innovation and expertise in the south-west of England, particularly in subsea oil and gas.
“Collaboration and driving efficiencies through new technology are critical if the sector is to thrive against the challenges of a low commodity price. Oil and gas is the largest market for subsea companies and the sector must rise to the challenge of developing new solutions that will increase production and recovery of hydrocarbon reserves at lower cost. This event is an important step in helping organisations in the south-west to come together and work towards a common goal. Anyone with an interest in the subsea industry is welcome to attend.” he says.
Anyone wishing to attend the event can purchase tickets from the Subsea UK website.
To find out more about Advanced Insulation’s products and services, visit http://www.aisplc.com, email info@aisplc.com or call +44 (0)1452 880880.
UK-based Advanced Insulation – a leading manufacturer of technical coatings, specialised passive fire protection systems and thermal insulation materials for the upstream oil and gas industry – has moved its Korea-based manufacturing operation to a larger facility in Sinpyeong-dong.
Commenting for Advanced Insulation Korea, General Manager Andrew Court says: “Following significant growth and expected demand from both Korean Shipyards and local EPC contracts for our ContraFlex® range of flexible passive fire insulation jackets, it was apparent that the existing facility in Hwajeon-dong was no longer suitable for the increased manufacturing requirements in Korea.”
Advanced Insulation’s ContraFlex range is designed to provide high-performance, thermal insulation and passive fire protection from jet or hydrocarbon fire to equipment that requires frequent maintenance access such as valves, actuators, welding nodes, manways, junction boxes, process vessels, hot equipment exhausts and localised protection.
Andrew goes on to say that Advanced Insulation Korea’s expansion to a 2,000 square meter facility highlights the growth the company is currently experiencing. “The increased space improves production efficiencies and warehousing to ensure that we continue to exceed our customers’ expectations. Recent growth and the expansion have allowed us to double the employment of local staff and build better business in Korea.”
The news follows similar recent announcements from Advanced Insulation regarding the expansion of its facilities in Gloucester, Plymouth and Houston.
To find out more about Advanced Insulation’s products and services, visit the website: http://www.aisplc.com or email info@aisplc.com.
Advanced Insulation (www.aisplc.com)
Since its formation in 2007, Advanced Insulation has become a single source provider for insulation and fire protection systems to the oil and gas industry, and represents one of the most respected and progressive names in topside and subsea insulation worldwide.
Advanced Insulation offers a wide range of products to meet the growing demand for fire protection and thermal insulation systems adaptable for elevated service temperatures and pressures.
AL-KO Kober (www.al-ko-co.uk)
Since 1931, AL-KO Kober has been manufacturing premium, high quality components used in the Automotive, Commercial and Leisure industry.
The extensive range of chassis components, premium accessories and spare parts are engineered to last, ensuring whatever product you have purchased, you will benefit from the generations of development and enjoy a lifetime of service.
Arc Energy Resources (www.arcenergy.co.uk)
Arc Energy Resources is one of the UK’s leading specialists in weld overlay cladding and fabrication for the oil & gas industry. The company’s expertise provides protection against corrosion and wear for a variety of process and pipeline equipment for use in any hostile environment.
The company recently made a major investment in two new Rotating Head welding machines costing £500,000. This has increased productivity and extended the size and scope of work it can handle, which now includes complicated component geometries for the full or partial cladding and fabrication of a huge range of component sizes weighing up to 15 tonnes. The company’s in-house designed cladding workstations feature state-of-the-art control systems developed to suit its customer’s specialised engineering requirements, and can clad bores up to four metres diameter and areas of restricted access within bores as small as 20mm diameter. Arc Energy also offers in-house test weld, heat treatment, PMI and NDT facilities.
Industry certifications include ISO 9001:2008 quality management, ISO 3834-2 fusion welding of metallic materials, and the internationally renowned ASME U and R Stamps, as well as ISO 14001:2004 environment management, Investors in People and OHSAS 18001:2007 Health & Safety management system.
Curtiss-Wright Industrial Group, which includes the legacy brands of Arens Controls, Penny & Giles, PG Drives Technology and Williams Controls, is a recognized leader in providing components and sub-systems which enable customer specific solutions for on- and off-highway vehicles. These include medium- and heavy-duty trucks, buses and motor coaches, construction and agricultural vehicles, materials handling, and other specialty vehicles, as well as sophisticated wheelchairs and scooters for medical mobility.
We are a leading provider of electronic throttle controls, transmission shifters and sensors for commercial off-highway equipment and heavy trucks, so helping to address the long-term trend towards attaining higher fuel efficiency and lower emissions. We also supply operator controls and advanced motor controllers for hybrid and electric vehicles, such as buses, forklift trucks, pallet stackers, wheelchairs and rehabilitation chairs.
With a proud legacy spanning more than 85 years, Curtiss-Wright is a global innovative company that delivers highly-engineered, critical-function products and services to the commercial, industrial, defense and energy markets. Building on the heritage of Glenn Curtiss and the Wright brothers, we have a long tradition of providing reliable solutions through trusted customer relationships.
Further information is available from the Curtiss-Wright Industrial website (www.cw-industrialgroup.com) or by calling +44 (0)1202 034000.
Euchner (UK) Limited (www.euchner.co.uk)
Safety for people, machines and products has been the maxim of this family-owned company since 1953. Stefan Euchner is the third generation to take the helm.
As specialists in industrial safety engineering, Euchner develops and manufactures products and solutions tailored to the requirements of customers from a wide range of sectors. Using its guards on machines and installations helps to minimise hazards and risks, which in turn protects people and processes. For its 800 employees around the world, safety is the watchword.
Further information is available from the Euchner (UK) Limited website (www.euchner.co.uk) or by calling +44 (0)114 256 0123.
Industry Superstore (www.industrysuperstore.co.uk)
Industry Superstore is a one-stop-shop for a wealth of budget-friendly, high-quality products tailored to industry!
Further information is available from the Industry Superstore website (www.industrysuperstore.co.uk) or by calling +44 (0)1892 664499.
Exmac Automation Limited has many years experience in the design, manufacture, and installation of unit conveyors, conveyor systems and associated materials handling equipment for most industry sectors.
Exmac Automation is part of the MacDonald Humfrey group of companies and are market leaders in the supply of automated materials handling equipment to the automotive, aerospace, white goods, warehouse & distribution, nuclear, pharmaceutical and food & beverage industries.
The group supplies to most industry sectors and have over 250 employees with many years experience in the design, manufacture and installation of unit conveyors, conveyor systems and associated materials handling equipment.
Projects have ranged from individual standard conveyors and bespoke handling applications, through to complete turnkey contracts involving conceptual and process design, installation and commissioning.
We are ISO 9001 accredited and constantly strive to achieve continuous improvements in the overall quality of our products and service.
Exmac Automation has has established a reputation for supplying high quality, robust systems at competitive prices.
In-house resources enable us to provide clients with a single source for complete systems integration including simulation, engineering, machining, fabrication, assembly, controls, installation & commissioning and after sales service.
Our 70,000 sq ft facility in Worcester has extensive design, manufacturing and assembly resources. Our skilled team of customer focussed automation professionals offers a broad base of knowledge and experience in a wide variety of industries.
A large workshop enables us to carry out comprehensive pre-installation assembly and factory acceptance tests on all projects.
Fulton Limited (www.fulton.co.uk)
The Fulton name has been synonymous with steam since the company first introduced the vertical tubeless steam boiler in 1949 and Fulton was established in Bristol in 1966. Fulton is still one of the world’s leading manufacturers, producing an unrivalled range of multi-fuel steam boilers. But increasingly these are ordered by customers as part of bespoke turnkey systems designed to meet exacting specifications.
Today Fulton Limited is an important design and manufacturing base in Fulton’s global network that also includes production facilities in the USA and China. The company’s UK facility makes it possible to manufacture products more efficiently and assemble completed units for whenever and wherever they are needed throughout the UK and in export markets.
Once just a steam boiler manufacturer, Fulton now specialises in ready-to-ship skid mounted and fully packaged boiler plant rooms to meet the current demand for off-site fabrication. The company puts great emphasis in providing sales and application advice and a full commissioning and after sales service to a growing customer base in hospital and healthcare facilities, food and beverage processing, laundries and other applications.
Design and manufacturing resources are shared and coordinated around the world, but no matter where your product originates, it will always be produced to the highest quality in a facility that is wholly owned and managed by the Fulton Group, which remains a privately owned family business.
Fulton’s heating and hot water systems can be delivered as fully prefabricated plant rooms or complete skid-mounted units, built to fit a prepared location and connect direct to your services.
Using the latest CAD equipment its design team can accommodate the most sophisticated engineering specifications in surprisingly compact spaces, locating components in the best possible position to suit the installation.
In every sense, today’s Fulton boiler systems are solutions that fit the requirements of the modern age of steam.
Gast Group (www.gastmfg.com / www.jun-air.com)
Since 1921, Gast Manufacturing, Inc. has been designing and manufacturing quality air-moving products. Our vacuum pumps, compressors, air motors, gear motors, vacuum generators, regenerative blowers and Smart Air technology meet the many challenging applications of OEMs and end-users worldwide.
For industrial manufacturing, health care lab, or environmental cleanup applications, Gast provides a full range of ideally suited and cost-effective solutions to any pneumatic problem.
Monodraught (www.monodraught.com)
In the current climate of soaring energy prices and the fear of global warming, increasing attention is being focused on Monodraught’s range of energy-free products.
Monodraught has always sought to invent, explore and develop innovative technologies that harness the wind and sun. Products include Windcatchers, Sunpipes, Suncatchers, Sola-vents, Sola-boosts and Cool-phase.
Nexen Lift Trucks (www.nexenlifttrucks.com)
Disillusioned with the ever-increasing complexity of new forklift trucks and the failure of the major manufacturers to provide a high level of support to their dealer networks, the decision was taken to develop its own range of forklifts.
In 2003 Nexen Lift Trucks was established with the vision to design and manufacture its own range with a combined 70 years experience of the lift truck rental industry. Nexen's ultimate goal is to build worldwide brand recognition based on its product's design and build quality as well as outstanding reliability at competitive prices.
In 2007 Nexen completed the purchase of the second largest lift truck manufacturer in Taiwan, creating the Nexen Motor Corporation. Initially the existing models were improved whilst a European based design team was established to develop a completely new range of trucks from the ground up to meet Nexen's standards.
Q8Oils (www.Q8Oils.co.uk / @Q8OilsUK)
Q8Oils has become a major player in the global lubricants market. Our success is founded on significant corporate resources, a commitment to product development and uncompromising standards of quality and service.
Q8Oils has a unique and innovative approach producing some of the world´s finest quality lubricants. Manufactured in its state of the art plant at Leeds, West Yorkshire, Q8Oils represent the very best and latest in lubricant technology. With over 1000 grades of finished lubricants, base oils, process oils, extracts and waxes.
We are dedicated to serving the needs of our customers by striving to understand, anticipate and satisfy their needs faster and better than our competitors. To achieve this our objective is to develop and supply products and services which reflect customer demands in each of our market sectors.
TLV Euro Engineering (www.tlv.co.uk)
TLV Euro Engineering UK is part of TLV, an internationally-established designer, manufacturer and provider of steam traps, condensate recovery pumps, pressure reducing valves and other specialist steam solutions. The company plays a leading role in the promotion of efficient energy systems and increased environmental conservation on a worldwide scale through its products and consulting and engineering services.
Rockatek (www.rockatek.com)
Cheltenham-based Rockatek Ltd is an engineering consultancy that offers design, analysis and physical testing services that set it apart from others. Its directors have over 40 years’ experience in complex engineering product optimisation and development; and its engineers specialise in engineering solutions for harsh environments and value improving reliability and performance.
Verco (www.ver.co.uk)
Founded in 1965, Verco quickly built a reputation for supplying quality refrigerated glass door and open chill cabinets to supermarkets, convenience and forecourt stores. Verco is now a leading supplier of retail refrigeration and the largest UK manufacturer of glass door cabinets.
