Curtiss-Wright Industrial division has announced the launch of the JC1210, a single-axis paddle joystick that extends the company’s recently-introduced JC1200 family by incorporating latching and overpress functionalities and offering multiple mounting solutions in a single body. This makes the new joystick controller ideal for use in control panels and armrest assemblies found in material handling vehicles, industrial trucks, agricultural equipment and construction machinery, where cost-effective, long-life operator controls are essential.
Developed by Curtiss-Wright’s brand family of Penny & Giles, the JC1210 paddle joystick features an additional 10 degrees of travel at both ends of the axis, which can be specified by machine designers and end users for either latching or overpress functions – or a combination of both – to meet system requirements to hold functions at full speed/float.
By using a long-life bearing system and non-contacting Hall-effect sensing technology, the JC1210 has already been rated to 5 million cycles (to start of overpress/latching) while providing functionality that is smooth and easy to operate. A soft-touch colored insert area of the paddle – which has a choice of nine colors – increases operator comfort and decreases the likelihood of finger-slip during operation.
Key features of the JC1210 include:
• An under-panel depth of 9mm, requiring minimal installation space
• A spring-loaded return-to-center paddle movement
• Colored ergonomic soft-touch grip
• IP67 protection of internal electronics and joystick-to-panel
• Two mounting-panel fixing variations (center line or corners) in one body
Like the JC1200, the JC1210 paddle joystick launches with a 5Vdc supply voltage and the option for factory-programmable electronics configured to one of two analog voltage output ranges (0.5-4.5V or 1.0-4.0V). The three electrical termination options include an integrated Molex connector, a flying lead with Molex connector or header pins.
The option of paddle overpress and/or latch, electrical terminations, output sense, output voltages and paddle soft-touch colors means the JC1210 paddle joystick will be launched with over 600 variations.
Robust JC1200 single-axis joystick has a long operating life
Curtiss-Wright Corporation today announced its Industrial division has launched the JC1200, a next-generation, cost-effective paddle joystick from the Corporation’s brand family of Penny & Giles.
By using a long-life bearing system and non-contacting Hall-effect sensing technology, the JC1200 has achieved a long operating life of 25 million cycles while providing functionality that is smooth and easy to operate.
Key features of the JC1200 include:
- An under-panel depth of 9mm, requiring minimal installation space
- A spring-loaded return-to-center or return-to-end paddle movement
- Integrated panel seal and IP67 protection – suitable for outside use
- A choice of nine colored paddle ‘Tabs’, which can be factory fitted or supplied separately and added as part of the final customer installation process
The JC1200 launches with a 5Vdc supply voltage and the option for factory-programmable electronics configured to one of two analog voltage output ranges (0.5-4.5V or 1.0-4.0V). The joystick also provides safety functionality via dual outputs, which can be set to positive or negative ramps, or a combination of both. This offers system designers the option to compare the output signals for error checking.
The JC1200 paddle joystick builds on the success of the potentiometric-based JC120 and is ideal for use in control panels and armrests found in industrial trucks, agricultural equipment and construction machinery, where cost-effective, long-life operator controls are essential.
Sales inquiries: Please forward all sales and reader service inquiries to cwig.uk@curtisswright.com.
For more information on Curtiss-Wright Industrial products, please visit www.cw-industrialgroup.com or call +44.1425.271444.
